Materials interaction during soldering and isothermal ageing of Sn-Pb and Sn-Ag-Cu solders on electroless Ni/Au surface finish
In flip chip interconnection an under bump metallurgy (UBM) is required to provide a diffusion barrier, an adhesion and a solderable surface. Among the various UBM systems available the electroless nickel / immersion gold (ENIG) has received greater attention in recent years due to its low cost and...
Saved in:
Main Author: | Tai, Siew Fong |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2003
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/4392/1/TaiSiewFongMFKM2003.pdf http://eprints.utm.my/id/eprint/4392/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Pb-free BGA solder joint reliability improvement with Sn3.5Ag solder alloy on Ni/Au finish
by: Leng, E.P., et al.
Published: (2017) -
Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers
by: Azmah Hanim, Mohamad Ariff, et al.
Published: (2013) -
Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2013) -
Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints
by: M.A., Rabiatul Adawiyah, et al.
Published: (2018) -
Isothermal annealing induced phase Coarsening in Sn-Ag-Cu and Sn-Ag solders
by: Norainiza, Saud, et al.
Published: (2010)