Cover Image

Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/cnt/cu menggunakan pelekukan nano (Effect of isothermal aging on microhardness properties of Sn-Ag-Cu/CNT/Cu using nanoindentation)

Effect of thermal aging towards hardness properties of Sn-3.0Ag-0.5Cu (SAC305) solder joint added with carbon nanotube (CNT) particles was investigated. Hardness properties indicate the strength of solder was determined by nanoindentation approach. SAC solder alloy was added with 0.03% weight percen...

Full description

Saved in:

Bibliographic Details
Main Authors:	Ismail, Norliza, Jalar, Azman, Abu Bakar, Maria, Ismail, Roslina, Safee, Nur Shafiqa, Ismail, Ahmad Ghadafi, Ibrahim, Najib Saedi
Format:	Article
Published:	Penerbit Universiti Kebangsaan Malaysia 2019
Subjects:	Q Science (General) QD Chemistry
Online Access:	http://eprints.um.edu.my/19949/ https://doi.org/10.17576/jsm-2019-4806-14
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/CNT/Cu menggunakan pelekukan nano
by: Norliza Ismail,, et al.
Published: (2019)

Nanoindentation characterization of Sn-Ag-Sb/Cu substrate IMC Layer subject to thermal aging
by: Shualdi, W., et al.
Published: (2017)

Nanoindentation characterization of Sn-Ag-Sb/Cu substrate IMC Layer subject to thermal aging
by: Shualdi W., et al.
Published: (2023)

Isothermal annealing induced phase Coarsening in Sn-Ag-Cu and Sn-Ag solders
by: Norainiza, Saud, et al.
Published: (2010)

Kesan penambahan tiubnano karbon terhadap pertumbuhan lapisan sebatian antara logam sistem pateri Sn-Ag-Cu/Cu akibat penuaan terma
by: Norliza Ismail,, et al.
Published: (2018)

Kesan Penambahan Tiubnano Karbon terhadap Pertumbuhan Lapisan Sebatian antara Logam Sistem Pateri Sn-Ag-Cu/Cu akibat Penuaan Terma (Effect of carbon nanotube addition on the growth of intermetallic layer of Sn-Ag-Cu solder system under thermal aging)
by: Ismail, Norliza, et al.
Published: (2018)

Nanoindentation creep on Cu3Sn, Cu6Sn5 and (Cu, Ni)6Sn5 intermetallic compounds grown in electrodeposited multilayered thin film
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2018)

Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints
by: M.A., Rabiatul Adawiyah, et al.
Published: (2018)

Aging effect of Sn-Ag-Cu lead free solder
by: Mohd Jeffry, Radzi
Published: (2009)

A review on mechanical properties of SnAgCu/Cu joint using laser soldering
by: Nabila, Tamar Jaya, et al.
Published: (2018)

A study on lead free SnAgCu solder system
by: Hoh, H.J., et al.
Published: (2017)

Effect of addition cobalt nanoparticles on Sn-Ag-Cu lead-free solder
by: Tay, S.L., et al.
Published: (2010)

Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects
by: Chia, P.Y., et al.
Published: (2016)

Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys
by: Shnawah, D.A., et al.
Published: (2015)

Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys
by: Shnawah, D.A., et al.
Published: (2015)

Shear speed analysis on Sn-3.9Ag-0.6Cu Solder
by: Zaliman, Sauli, Dr., et al.
Published: (2014)

Corrosion properties of Cu/Sn-3.0Ag-0.5Cu/Cu solder butt joints fabricated by conventional reflow and microwave hybrid heating
by: Said, Mardiana, et al.
Published: (2022)

Synthesis and characterization of lead free SnCu & SnCu/SiC composite solder
by: Nur Syahirah, Mohamad Zaini
Published: (2022)

A comparative study of Sn3.5Ag and Sn3.8Ag0.7Cu for BGA spheres on Ni/Au finish
by: Eu, P.-L., et al.
Published: (2017)

Interfacial reaction and dissolution behavior of Cu substrate in molten Sn-3.8Ag-0.7Cu in the presence of Mo nanoparticles
by: Arafat, M.M., et al.
Published: (2011)

Brazeability and mechanical properties of Ag-Cu-Sn brazing filler metals on copper-brazed joint
by: Basri, D.K., et al.
Published: (2014)

Investigation of Sn3.5Ag and Sn3.8Ag0.7Cu Pb-free Alloys for BGA application on Ni/Au Finish
by: Eu, P.-L., et al.
Published: (2017)

A comparison study on SnAgNiCo and Sn3.8Ag0.7Cu C5 lead free solder system
by: Leng, E.P., et al.
Published: (2017)

Interfacial reaction between Sn -37Pb and Sn - 4Ag - 0.5Cu solders on different surface finishes
by: Mohamed Ariff, Azmah Hanim
Published: (2007)

Characterization And Corrosion Behaviour Of 96.5sn-3.0ag- 0.5cu Solder On Cu Substrate At Different Reflow Reactions
by: Lee , Liu Mei
Published: (2013)

Characterization and corrosion behaviour of 96.5Sn-3.0Ag-0.5Cu solder on Cu substrate at different reflow reactions
by: Lee, Liu Mei
Published: (2013)

Investigation on mechanical, microstructural and thermal properties of Sn-0.7Cu and Sn-1Ag 0.5Cu solder alloys bearing Fe and Bi / Mohammad Hossein Mahdavifard
by: Mohammad Hossein, Mahdavifard
Published: (2017)

Study Of Wettability And Corrosion Behavior Of Sn-37pb, Sn-8zn-3bi And Sn-3ag-0.5cu Solders
by: Ridhai, Mohammed Noori
Published: (2010)

Effects of current density on the formation and microstructure of Sn–9Zn, Sn–8Zn–3Bi and Sn–3Ag–0.5Cu solder joints
by: Othman, R., et al.
Published: (2012)

Intermetallic growth of Sn-Ag-Sb/Ni plated Cu in power packaging subject to thermal aging
by: Shualdi, W., et al.
Published: (2017)

Intermetallic growth of Sn-Ag-Sb/Ni plated Cu in power packaging subject to thermal aging
by: Shualdi W., et al.
Published: (2023)

Cu6 Sn5 and Cu3 Sn intermetallics study in the Sn-40Pb/Cu system during long-term aging / Ramani Mayappan and Zainal Arifin Ahmad
by: Mayappan, Ramani, et al.
Published: (2010)

Materials interaction during soldering and isothermal ageing of Sn-Pb and Sn-Ag-Cu solders on electroless Ni/Au surface finish
by: Tai, Siew Fong
Published: (2003)

Intermetallic compound formation between Sn - 37Pb & Sn - Ag - Cu lead - free solders and immersion silver surface finish
by: Osman, Saliza Azlina
Published: (2008)

Synthesis Of TiO2 Nanoparticles And Characterization Of Sn-3.0Ag-0.5Cu/TiO2 Via Nanoindentation And Selective Electrochemical Etching
by: Yahaya@Kamaluddin, Muhamad Zamri
Published: (2018)

Fabrication of Cu2SnS3 thin film solar cells by sulphurization of sequentially sputtered Sn/CuSn metallic stacked precursors
by: Hossain, E.S., et al.
Published: (2020)

Fabrication of Cu2SnS3 thin film solar cells by sulphurization of sequentially sputtered Sn/CuSn metallic stacked precursors
by: Hossain E.S., et al.
Published: (2023)

Potential enhancement in mechanical and physical properties of Sn-Ag-Cu lead free solder as a replacement material for Sn-Pb in electronic packaging
by: Mat Hussin, Nur Liyana, et al.
Published: (2015)

Reflow of Sn-3.8Ag-O.7Cu solder on Ni substrate in presence of Mo nanoparticles
by: Mahdavifard, M.H., et al.
Published: (2013)

Interfacial reaction analysis of Sn-Ag-Cu solder reinforced with 0.01wt% CNTs with isothermal aging
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2016)