3D simulation investigating ZnO NWFET characteristics
3D Simulation was carried out and compared with fabricated ZnO NWFET. The device had the following electrical output characteristics: mobility value of 10.0 cm2 /Vs at a drain voltage of 1.0 V, threshold voltage of 24 V, and subthreshold slope (SS) of 1500 mV/decade. The simulation showed that the d...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Trans Tech Publications Ltd
2019
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/87985/1/SuhanaMohamedSultan2019_3DSimulationInvestigatingZnoNweetCharacteristics.pdf http://eprints.utm.my/id/eprint/87985/ http://dx.doi.org/10.4028/www.scientific.net/JNanoR.58.40 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | 3D Simulation was carried out and compared with fabricated ZnO NWFET. The device had the following electrical output characteristics: mobility value of 10.0 cm2 /Vs at a drain voltage of 1.0 V, threshold voltage of 24 V, and subthreshold slope (SS) of 1500 mV/decade. The simulation showed that the device output results are influenced by two main issues: (i) contact resistance (Rcon ≈ 11.3 MΩ) and (ii) interface state trapped charge number density (QIT = 3.79 x 1015 cm-2). The QIT was derived from the Gaussian distribution that depends on two parameters added together. These parameters are: an acceptor-like exponential band tail function gGA(E) and an acceptor-like Gaussian deep state function gTA(E). By de-embedding the contact resistance, the simulation is able to improve the device by producing excellent field effect mobility of 126.9 cm2 /Vs. |
|---|