A study of 3-D Zinc Oxide nanowire field effect transistor with defect and interface charge density
Electrical characteristics of three-dimensional Zinc Oxide nanowire field effect transistor has been studied using 3-D TCAD tool. The device exhibited a good output performance that clearly shows linear and saturation mode with threshold voltage of 0.75V, field-effect mobility of ∼108 cm2/v.s and on...
Saved in:
| Main Authors: | , |
|---|---|
| 格式: | Conference or Workshop Item |
| 出版: |
Institute of Electrical and Electronics Engineers Inc.
2016
|
| 主題: | |
| 在線閱讀: | http://eprints.utm.my/id/eprint/73328/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-84966692459&doi=10.1109%2fSCORED.2015.7449373&partnerID=40&md5=b839906c1190633bfe1a7ca8882eb1a8 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Electrical characteristics of three-dimensional Zinc Oxide nanowire field effect transistor has been studied using 3-D TCAD tool. The device exhibited a good output performance that clearly shows linear and saturation mode with threshold voltage of 0.75V, field-effect mobility of ∼108 cm2/v.s and on/off current ratio of ∼109. This device is then introduced with defect and interface charge density separately, which results on reduction of the field-effect mobility and an increase of the threshold voltage. This study is useful to determine possible factors causing poor performance of fabricated device and also can work as gas sensor device by putting trap or change the surface charge density. |
|---|