Interfacial reaction of Bi–Ag and Bi–Sb solders on copper substrate with multiple reflow number

• Main Authors: Nahavandi, Mahdi, Mohamed Ariff, Azmah Hanim, Zahari, Nur Ismarrubie, Baserfalak, F.
• Format: Article
• Language: English
• Published: W. S. Maney & Son 2014
• Online Access: http://psasir.upm.edu.my/id/eprint/34236/1/Interfacial%20reaction%20of%20Bi%E2%80%93Ag%20and%20Bi%E2%80%93Sb%20solders%20on%20copper%20substrate%20with%20multiple%20reflow%20number.pdf; http://psasir.upm.edu.my/id/eprint/34236/; http://tandfonline.com/doi/full/10.1179/1432891714Z.000000000976

Owing to the toxicity of lead, much effort has been put in studies on lead-free solders after environmental legislations prohibited the use of lead in these parts worldwide. Here, Bi–Ag and Bi–Sb alternative solder alloys containing 1·5–5 wt-% Ag and Sb were investigated. The effect of the reflow number and weight percentage of Ag and Sb on the surface properties of solders and interfacial reactions between the solder bulk and the Cu substrate were analysed by optical microscopy and scanning electron microscopy–energy dispersive X-ray. The results show that by increasing the reflow number and wt-% of Ag and Sb in the solder bulk, the thickness of the mechanical grain boundary grooving is increased. However, the thickness of the Cu3Sb intermetallic compound layer at the interface of Bi–5Sb decreased by increasing the reflow number. Moreover, our findings show that the amount of Ag and Sb in solder alloys and the reflow number have different behaviours on the wettability properties. By increasing the reflow number, the wetting angle decreased in Bi–Ag solder alloys, whereas it increased in Bi–Sb solder alloys.