Design and Construction of 4-DOF EMG-Based Robot Arm System
Electromyography (EMG) provides an alternative way of providing signal responses from the muscle. As such, the recent trend in developing myoelectric devices has spark the interest in this specific field of study. This is because the traditional controllers lack in certain parts which reduce the uti...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Blue Eyes Intelligence Engineering & Sciences Publication
2019
|
| Online Access: | http://eprints.utem.edu.my/id/eprint/24256/2/L111610812S219.PDF http://eprints.utem.edu.my/id/eprint/24256/ http://www.ijitee.org/wp-content/uploads/papers/v8i12S2/L111610812S219.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Electromyography (EMG) provides an alternative way of providing signal responses from the muscle. As such, the recent trend in developing myoelectric devices has spark the interest in this specific field of study. This is because the traditional controllers lack in certain parts which reduce the utilization of limbs to control devices mainly the robotic arm. However, noise such as crosstalk, motion artifact, ambient noise and inherent noise have become a major issue when handling EMG signals. The preparation of electromyography requires more attention in terms of muscle group selection, electrode placement and condition of the surrounding as it will affect the signal output. The aim of this project is to develop a 4 degree-offreedom (DOF) robotic arm that can be controlled using EMG signals. The correlation between the EMG signal and the robotic arm are required to be identified in order to analyze the
performance of robotic arm. Review on the actuator, electromyography methods and microcontroller are done to evaluate the techniques used from past researches. The methods
of this project include hardware development of robotics arm, development of forward kinematic, sensor calibration and electrode positioning and experiment on classification and validation of EMG signals based on hand gestures. The experiment showed that the sampling rate and arm position affect the EMG signal output. In addition, the controllability of the robotic arm was low because the motors are controlled independently. The objective of the project has been achieved as the EMG-controlled robotic arm has been successfully developed. The robotic arm is still available for improvement by adding multiple channel sensors and implementing a wireless system. |
|---|