Design of an end effector for a manipulator with loading and unloading mechanisms
The industrial manipulator is competent to lift and manipulate heavy loads. It utilizes a cylinder to supply pressure to the manipulator's arm for the loading and unloading mechanism. To achieve this objective, the conventional type of industrial manipulator often requires the operator to manua...
Saved in:
Main Author: | Chan, Yi Han |
---|---|
Format: | Final Year Project / Dissertation / Thesis |
Published: |
2022
|
Subjects: | |
Online Access: | http://eprints.utar.edu.my/5339/1/ME_1800649_FYP_Report_%2D_YI_HAN_CHAN.pdf http://eprints.utar.edu.my/5339/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Designing a pepper harvester end effector
by: Tiong, I.H
Published: (2010) -
Robot arm end effector control using soft actuator
by: Rosli, Nur Fatiha, et al.
Published: (2012) -
Design And Development Of Robot End-Effector For The Use In Lower-Limb Stroke Rehabilitation Exercises
by: Murugaya, Thivines
Published: (2022) -
Increasing ABB FlexPicker Robot’s Degree Of Freedom (DOF) Using Flexible End Effector
by: Mohd Hisham, Nordin, et al.
Published: (2016) -
Deployable linear-to-circular polarizer using PDMS based on unloaded and loaded circular FSS arrays for pico-satellites
by: Mirza, H., et al.
Published: (2019)