Beam steering printed dipole antenna on incorporate of polymeric and HIS

• Main Authors: Lago, H., Jamlos, M. F., Hamid, M. R.
• Format: Conference or Workshop Item
• Published: Institute of Electrical and Electronics Engineers Inc. 2016
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/73029/; https://www.scopus.com/inward/record.uri?eid=2-s2.0-84995477274&doi=10.1109%2fRFM.2015.7587740&partnerID=40&md5=09f438adbc05651f875e89ff3cbeaf49

This report presented a beam steering dipole antenna on incorporate polymeric and High Impedance Surface (HIS). In order to achieve the reconfigurability, two radio frequency (RF) switches are implemented on the antenna. By manipulating the RF switch state, the antenna is capable of reconfiguring its beam into two different directions at 28° and -28°. The RF switch will affected the antenna gain due to the electronic losses, thus High Impedance Surface (HIS) is applied on the antenna. In order to enhance the antenna bandwidth, a polymeric material is employed. With a dimension of 27.45 × 50.7 mm, the antenna has potential to sustain the gain of 6.27 dB and 1.24 GHz of bandwidth for all states.