Photo-triggered sustainable adhesive based on itaconic acid
Photoadhesives have been beneficial for a plethora of applications due to advantages in spatiotemporal control, flexible operating temperature, and in situ applicability. As a sustainable approach, bio-based precursors have been applied for the production of photoadhesives. However, the use of toxic...
Saved in:
Main Authors: | , , , , , , , , , |
---|---|
Format: | Article |
Published: |
American Chemical Society
2022
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/100567/ http://dx.doi.org/10.1021/acssuschemeng.2c01119 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Photoadhesives have been beneficial for a plethora of applications due to advantages in spatiotemporal control, flexible operating temperature, and in situ applicability. As a sustainable approach, bio-based precursors have been applied for the production of photoadhesives. However, the use of toxic chemicals and incorporation of petroleum-based chemicals in the synthesis process is inevitable. In this study, a photocurable itaconic acid-based polyester, poly(1,3-propanediol-co-citrate-co-itaconate-co-1,12-dodecanedioate) (IAP), was developed from bio-based precursors through a facile, catalyst-free, and solvent-free polycondensation process without use of toxic chemicals. Ultraviolet (UV)-triggered photocross-linking in the presence of a photoinitiator was found to induce adhesion capability in IAP. With 30 min of UV exposure, IAP presented an adhesion strength of 1286.0 ± 19.2 kPa against acrylic substrates. Remarkable adhesion strengths to stainless steel, wood, glass, and polytetrafluoroethylene substrates were also achieved. Due to photo-induced reduction in hydrophilicity of IAP, the polymer was able to repel water at the adhesive-substrate interface upon in situ underwater photocuring, leading to successful wet adhesion. Subsequently, excellent photo-adhesion was also obtained from in situ photocuring of IAP in seawater, simulated body fluid, and silicon oil. This study provides insights into the development of a photo-enhanced and versatile adhesive through green engineering. |
---|