Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting
The hypereutectic AlSi alloys contain Si more than 12.3 % (eutectic point), and possesses better mechanical properties than eutectic and hypoeutectic AlSi alloys. But the higher percentage of Si in the hypereutectic AlSi alloy caused to result primary and eutectic Si in microstructure during melt...
Saved in:
Main Author: | Ahmed Bhutto, Aqeel |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2021
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/1776/2/AQEEL%20AHMED%20BHUTTO%20-%20declaration.pdf http://eprints.uthm.edu.my/1776/1/AQEEL%20AHMED%20BHUTTO%20-%2024p.pdf http://eprints.uthm.edu.my/1776/3/AQEEL%20AHMED%20BHUTTO%20-%20fulltext.pdf http://eprints.uthm.edu.my/1776/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
by: Syukron, Muhammad
Published: (2016) -
Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA)
by: M El-Aswad, Ashraf Mahmood
Published: (2015) -
Penghasilan Dan Pencirian Komposit Matriks Zn Diperkuat Partikel SiC Melalui Kaedah Metalurgi Serbuk.
[TA418.9.C6 J94 2003 f rb] [Microfiche 7546]
by: Mohamed, Julie Juliewatty
Published: (2003) -
Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods
by: Jamian, Saifulnizan, et al.
Published: (2019) -
Solidification, microstructure and mechanical properties of Mg-2.8Nd-1.5Gd-0.5Zn-0.5Zr cast alloy with erbium addition
by: Ahmad, R., et al.
Published: (2018)