Design and implementation of laser missile frequency jamming system using Spatial Parallelism on FPGA for better performance and throughput
When a processing multiple data input at a time, exploring the parallelism mechanism is required. The spatial parallelism can provide the ability for duplicating the task for a specific module. The current Frequency Jamming systems have the ability to detect one frequency signal at a time and conf...
Saved in:
Main Author: | |
---|---|
Other Authors: | |
Format: | Thesis |
Language: | English |
Published: |
Universiti Malaysia Perlis (UniMAP)
2019
|
Subjects: | |
Online Access: | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/62128 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | When a processing multiple data input at a time, exploring the parallelism mechanism is required. The spatial parallelism can provide the ability for duplicating the task for a
specific module. The current Frequency Jamming systems have the ability to detect one
frequency signal at a time and confront critical issue like delay in processing the signals.
This delay is considered as a natural reason for the system modules architecture or in
which way these signals were processed or even the computational ability of these
modules. Detecting the emitted frequencies of four proposed laser missiles launchers is
done in this research. Applying the spatial parallelism mechanism over the FPGA
enriches the proposed system with multiple critical features. These gained features are
considered as a key factor in any system failure or success like decreasing the system
cost, speed up the system performance as well as increasing the system alongside with
decreasing the power consumption. The entire Laser Missile Frequency Jamming system
is designed and implemented on Field Programmable Gate Array (FPGA) chip. The
proposed system is synthesized and evaluated based on the Nios II Embedded Evaluation
Kit (NEEK). The performance of the proposed system shows scalable speedup and
enhanced system performance. The implementation has achieved acceptable throughput
and lower complexity (small size (2604)) logic elements in terms of FPGA resource
usage and high operating frequency (200 MHz)). In addition, the structural design
methodology also allows scalability of the ECCA as the entire system grows. |
---|