The comparison between four PLCC packages and eight PLCC packages in personal computer (PC) using computational Fluid Dynamic (CFD), FLUENT TM using epoxy moulding compound material (EMC)
The paper present the three dimensional numerical analysis of heat and fluid flow through Plastic Leaded Chip Carrier (PLCC) packages in inline orientation horizontally mounted on a printed circuit board in a wind tunnel is carried out using a commercial CFD code, FLUENTTM by using Epoxy Moulding Co...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Non-Indexed Article |
| Published: |
Trans-Tech Publication
2013
|
| Online Access: | http://discol.umk.edu.my/id/eprint/7868/ http://dx.doi.org/10.4028/www.scientific.net/AMR.795.174 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The paper present the three dimensional numerical analysis of heat and fluid flow
through Plastic Leaded Chip Carrier (PLCC) packages in inline orientation horizontally mounted on
a printed circuit board in a wind tunnel is carried out using a commercial CFD code, FLUENTTM by
using Epoxy Moulding Compound (EMC) as a main material. The study was made for four and
eight packages with different Reynolds Number and package chip powers. The results are presented
in term of junction temperature for four and eight PLCC package under different conditions. It is
observed the chip temperatures of eight PLCC packages have higher junction temperature compare
to four PLCC packages due to effect of other PLCC because of space and gap between PLCC that
have more number of PLCC is smaller. Hence it makes junction temperature of eight PLCC higher
compare to four PLCC packages. Moreover, the junction temperature of the packages decreases
with increase in Reynolds Number. |
|---|