Fretting wear of metallic multilayer films
Fretting wear behaviour of electrodeposited Cu/Ni multilayer films with 10 and 5 nm thick sublayers has been investigated against a hardened steel ball as the counter body and compared with that of the constituents, Cu and Ni. The wear tests were carried out by using a ball-on-flat geometry at a tra...
Saved in:
Main Authors: | Haseeb, A.S. Md. Abdul, Celis, Jean Pierre, Roos, Jozef R. |
---|---|
Format: | Article |
Published: |
Elsevier
2003
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/5776/ https://doi.org/10.1016/S0040-6090(03)01089-7 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Wear failure of a leaded bronze bearing: correlation between plant experience and laboratory wear test data
by: Ahsan, Q., et al.
Published: (2003) -
Tribo-surface characteristics of Al-B4C and Al-SiC composites worn under different contact pressures
by: Shorowordi, Kazi Md, et al.
Published: (2006) -
Chemical and structural nature of tribo-surface of aluminium-SiC composites at nanometre and micrometre length scales
by: Shorowordi, Kazi Md, et al.
Published: (2006) -
Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2008) -
Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study
by: Shorowordi, Kazi Md, et al.
Published: (2003)