Narrow bandwidth optimization using a polymer microring resonator in a thulium–holmium fiber laser cavity

• Main Authors: Zamzuri, Abdul Kadir, Ariannejad, Mohammad Mahdi, Samion, Muhamad Zharif, Tan, Chee Leong, Ismail, Mohammad Faizal, Bayang, Leonard, Ahmad, Harith
• Format: Article
• Published: Elsevier 2020
• Subjects: Q Science (General); QC Physics
• Online Access: http://eprints.um.edu.my/24565/; https://doi.org/10.1016/j.optcom.2020.125574

A thulium–holmium fiber (THDF) laser cavity has been demonstrated with a SU-8 polymer microring resonator (PMRR) in the cavity. The PMRR has a 500μm radius and fabricated using the lithography method, with the SU-8 polymer acting as a host material. The butt coupling method was used for the horizontal coupling of light from a ultra-high numerical aperture (UHNA) fiber to the polymer waveguide. Lasing in the cavity without the PMRR is obtained at a center wavelength of 1.910μm, 1.869μm when the PMMR is inserted into the cavity. A maximum power of -5 dBm was extracted from the laser oscillator, and the laser linewidth was measured to be ∼26.6 kHz by radio-frequency spectrum analyzer analysis. The PMRR was able to generate an output with a free spectral range of 0.79μm at a frequency of 59.25 GHz. © 2020 Elsevier B.V.