Narrow bandwidth optimization using a polymer microring resonator in a thulium–holmium fiber laser cavity
A thulium–holmium fiber (THDF) laser cavity has been demonstrated with a SU-8 polymer microring resonator (PMRR) in the cavity. The PMRR has a 500μm radius and fabricated using the lithography method, with the SU-8 polymer acting as a host material. The butt coupling method was used for the horizont...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Published: |
Elsevier
2020
|
| Subjects: | |
| Online Access: | http://eprints.um.edu.my/24565/ https://doi.org/10.1016/j.optcom.2020.125574 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A thulium–holmium fiber (THDF) laser cavity has been demonstrated with a SU-8 polymer microring resonator (PMRR) in the cavity. The PMRR has a 500μm radius and fabricated using the lithography method, with the SU-8 polymer acting as a host material. The butt coupling method was used for the horizontal coupling of light from a ultra-high numerical aperture (UHNA) fiber to the polymer waveguide. Lasing in the cavity without the PMRR is obtained at a center wavelength of 1.910μm, 1.869μm when the PMMR is inserted into the cavity. A maximum power of -5 dBm was extracted from the laser oscillator, and the laser linewidth was measured to be ∼26.6 kHz by radio-frequency spectrum analyzer analysis. The PMRR was able to generate an output with a free spectral range of 0.79μm at a frequency of 59.25 GHz. © 2020 Elsevier B.V. |
|---|