Comparative study of interfacial interaction between aromatic and aliphatic functional group in solder wettability
The effect of using different flux on wettability of Sn-Ag-Cu lead free solder were investigated. In this study, solder paste Sn-3.0Ag-0.5Cu (SAC305) was used by introducing two types of no-clean flux with different ingredients. The solders namely as SAC305-A and SAC305-B respectively. Then, the bot...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Published: |
Springer
2018
|
| Subjects: | |
| Online Access: | http://eprints.um.edu.my/21782/ https://doi.org/10.1007/s10854-018-9410-8 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The effect of using different flux on wettability of Sn-Ag-Cu lead free solder were investigated. In this study, solder paste Sn-3.0Ag-0.5Cu (SAC305) was used by introducing two types of no-clean flux with different ingredients. The solders namely as SAC305-A and SAC305-B respectively. Then, the both solder paste manually printed on printed circuit board (PCB) using stencil printing and then reflowed at 260 °C temperature. Wettability of Sn-Ag-Cu solder using different flux was determined by contact angle measurement using Alicona ® IFM software. Results show the SAC305-A solder alloys have a good and better wettability with lower contact angle compared to SAC305-B. Functional groups of both solder flux was identified by FTIR analysis. Meanwhile XPS analysis was performed in characterizing the studied fluxes. It was found that no-clean flux solder with aromatic functional groups showed lower contact angle value and better wettability than aliphatic contained functional groups. |
|---|