Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness
Due to their low cost, lightweight, antifouling and anticorrosion properties, polymer heat exchangers (PHXs) are replacing metal heat exchangers in a variety of applications. Nowadays, 3D printing technology is gaining increasing attention to fabricate these PHXs. This study employs Fused Deposition...
Saved in:
Main Authors: | Ahmad, A., Abbas, A., Hussain, G., Al-Abbasi, O., Alkahtani, M., Altaf, K. |
---|---|
Format: | Article |
Published: |
Springer Science and Business Media Deutschland GmbH
2023
|
Online Access: | http://scholars.utp.edu.my/id/eprint/37323/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-85168363624&doi=10.1007%2fs00170-023-12079-5&partnerID=40&md5=e7837d671eacbdee9c827f75c075085a |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of print bed's heat flow on curling and surface roughness of FDM-printed abs sample
by: Lau, Kok Tee, et al.
Published: (2023) -
Applied normal load and printing layer thickness relationship on the tribological properties of novel 3D-printed PLA-PCU polymer blend
by: Shaharuddin, Shanahs, et al.
Published: (2023) -
Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing
by: Mohamad Talhah Al Hafiz, Mohd Khata, et al.
Published: (2024) -
Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using dlp 3d printing
by: Mohd Khata, Mohamad Talhah Al Hafiz, et al.
Published: (2024) -
Printing fine solid lines in flexographic printing process
by: Yusof, Mohd Sallehuddin
Published: (2011)