Enhancing CO2 separation from N2 mixtures using hydrophobic porous supports immobilized with tributyl-tetradecyl-phosphonium chloride P44414Cl

• Main Authors: Mulk, W.U., Hassan Shah, M.U., Shah, S.N., Zhang, Q.-J., Khan, A.L., Sheikh, M., Younas, M., Rezakazemi, M.
• Format: Article
• Published: Academic Press Inc. 2023
• Online Access: http://scholars.utp.edu.my/id/eprint/37290/; https://www.scopus.com/inward/record.uri?eid=2-s2.0-85167818400&doi=10.1016%2fj.envres.2023.116879&partnerID=40&md5=69bd0d3bce85dec3b80de331f789d22c

The main obstacles in adopting solvent-based CO2 capture technology from power plant flue gases at the industrial scale are the energy requirements for solvent regeneration and their toxicity. These challenges can be overcome using new green and more stable ionic liquids (ILs) as solvents for post-combustion CO2 capture. In the current study, tributyl-tetradecyl-phosphonium chloride P44414Cl as an IL, was immobilized on hydrophobic porous supports of polypropylene (PP), polyvinylidene fluoride (PVDF), and polytetrafluoroethylene (PTFE) at 298 ± 3 K and pressures up to 2 bar. The surface morphology indicated homogenous immobilization of the IL on the membrane support. Supported ionic liquid membranes (SILMs) were tested for CO2 permeability and CO2/N2 selectivity. None of the SILMs exhibited IL leaching up to 2 bar. The PTFE-based SILM performed better than other supports with minimum loss in water contact angle (WCA) and achieved good antiwetting with a maximum CO2 permeability and selectivity over N2 of 2300 ± 139 Barrer and 31.60 ± 2.4, respectively. This work achieves CO2 permeability about two-fold more than other works having CO2/N2 selectivity range of 25�35 in similar SILMs. The diffusivity of CO2 and N2 in P44414Cl was measured as 3.64 ± 0.18 and 2.01 ± 0.09 10�8 cm2 s�1 and CO2 and N2 solubility values were 9.79 ± 0.47 and 0.19 ± 0.001 10�2 cm3(STP) cm�3 cmHg�1, respectively. The high values of Young's modulus and tensile strength of the PTFE support-based SILM (234 ± 12 MPa and 6.07 ± 0.31 MPa, respectively) indicated the long-term application of SILM in flue gas separation. The results indicated phosphonium chloride-based ILs could be better solvent candidates for CO2 removal from large volumes of flue gases than amine-based ILs. © 2023 Elsevier Inc.