Numerical Gas�Liquid Two-Phase Flow Regime Identification in a Horizontal Pipe Using Dynamic Pressure Data

• Main Authors: Khan, U., Pao, W., Sallih, N.
• Format: Article
• Published: 2023
• Online Access: http://scholars.utp.edu.my/id/eprint/34344/; https://www.scopus.com/inward/record.uri?eid=2-s2.0-85146729252&doi=10.3390%2fapp13021225&partnerID=40&md5=f22ebce96a8ad6cfa8efc99a4eaed258

Gas�liquid two-phase flow is very common in industrial pipelines. Flow regime identification is the first step to design, analyze, and operate the gas�liquid system successfully. The purpose of this study is to develop a methodology for identification of a two-phase flow regime using post signal processing techniques, namely Fast Fourier Transform (FFT) and Probabilistic Density Function (PDF). Three different flow regimes were simulated in a 6 m horizontal pipe with a 0.050 m inner diameter. A Level-Set (LS) method coupled with Volume of Fluid (VOF) method is used to model the air�water interface. After validation of the numerical method, dynamic pressure readings were collected with the intent to identify the associated flow regimes by post-processing of these signals. It was concluded that dynamic pressure signals of different flow regimes show different characteristics (like dominant frequency, FFT amplitude, PDF location and PDF magnitude) in the time and frequency domains. These characteristics can be potentially used as differentiating factors to distinguish different flow regimes. This research is limited to stratified, slug, and annular flow in the horizontal pipe. This paper uses a new approach to identify the flow regime in a horizontal pipe by Fast Fourier Transform and Probability Density Function of dynamic pressure readings obtained by using numerical simulation. © 2023 by the authors.