Cover Image

Suppressed vibrations during thermal-assisted machining of titanium alloy Ti-6A1-4V using PCD inserts

Saved in:

Bibliographic Details
Format:	Citation Index Journal
Published:	2012
Online Access:	http://eprints.utp.edu.my/9443/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2008)

Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts
by: Turnad L., Ginta, et al.
Published: (2008)

Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts
by: Ginta , Turnad L., et al.
Published: (2008)

Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models
by: Ginta, Turnad Lenggo, et al.
Published: (2011)

Assessment of the Uncoated Carbide inserts in end milling of Titanium Alloy Ti-6AI-4V
by: Sheng, Caleb Ng Zhu
Published: (2016)

Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet
by: Abu Bakar, Mohd Hadzley, et al.
Published: (2013)

Thermally-assisted end milling of titanium alloy Ti-6Al-4V using induction heating

Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert
by: Mastuki, Ammar Aizat
Published: (2019)

Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2010)

Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining
by: Ginta, Turnad Lenggo, et al.
Published: (2013)

Optimization of cutting parameter for machining Ti-6Al-4V titanium alloy
by: Noor Danish, N. H. D., et al.
Published: (2022)

Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005)

Some aspects of improved machinability in preheated machining of Titanium alloy Ti-6Al-4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Surface integrity in end milling titanium alloy Ti-6A1-4V under heat assisted machining

Influence of workpiece preheating on chatter and machinability of Titanium alloy - Ti6Al4V
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Energy and carbon footprint analysis for machining titanium Ti-6Al-4V alloy
by: Rajemi, Mohamad Farizal, et al.
Published: (2009)

Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling
by: Ali, M.H., et al.
Published: (2018)

Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining
by: Ginta, Turnad Lenggo, et al.
Published: (2012)

Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Embedment of HA/Ti composite on superplastic titanium alloy (Ti-6Al-4V)
by: Mohamad Dom, Adibah Haneem, et al.
Published: (2010)

Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes
by: Jonid, Izyan Dayana
Published: (2019)

PCD inserts in end milling of Aluminum Silicon Carbide (AlSiC)
by: M. K. , Nor Khairusshima, et al.
Published: (2011)

Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007)

High speed machining of titanium alloy, Ti6Al4V to achieve nano level surface roughness
by: Amin, A. K. M. Nurul, et al.
Published: (2012)

Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2009)

Tool life prediction by response surface methodology in end milling titanium alloy Ti-6Al-4V using uncoated WC-Co inserts
by: Turnad, L. Ginta, et al.
Published: (2009)

Tool life prediction by response surface methodology in end milling titanium alloy Ti-6A1-4V using uncoated WC-Co inserts
by: Turnad L., Ginta, et al.
Published: (2009)

Microstructure Analysis on flooded thread cutting of titanium Alloy Ti-6Al-4V
by: Siti Hartini Hamdan, Mohd Naqiudddin Hussin, et al.
Published: (2013)

Mechanical and Physical Properties of Titanium Alloy Ti6Al4V-7Y
by: Md Zuki, Mohamad Hanif Hazrin
Published: (2012)

Mechanical and Physical Properties of Titanium Alloy Ti6Al4V-2Y
by: Md Yusoff, Ahmad Sofwan
Published: (2012)

Fuzzy rule-based for predicting machining performance for SNTR carbide in milling titanium alloy (ti-6al-4v)
by: Adnan, M. R. H. M., et al.
Published: (2012)

Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method
by: Jaafar, Noor Azam
Published: (2013)

Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method
by: Md Ali, Mohd Amran, et al.
Published: (2014)