Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel
There is a high roughness and tool wear rate (TER), and a minimal material erosion rate (MER) when 316L steel is machined through conventional or conductive powder mixed electro-discharge (EDM) processes. Since the required machining outputs are primarily dependent on process parameters due to their...
Saved in:
Main Authors: | Danish, M., Al-Amin, M., Rubaiee, S., Abdul-Rani, A.M., Zohura, F.T., Ahmed, A., Ahmed, R., Yildirim, M.B. |
---|---|
Format: | Article |
Published: |
Springer Science and Business Media Deutschland GmbH
2022
|
Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85127594083&doi=10.1007%2fs00170-022-09157-5&partnerID=40&md5=b49801eab33ca7a85d0712205eb6b687 http://eprints.utp.edu.my/33056/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel
by: Danish, Mohd, et al.
Published: (2022) -
Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel
by: Al-Amin, M., et al.
Published: (2021) -
Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process
by: Al-Amin, M., et al.
Published: (2023) -
Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel
by: Danish, M., et al.
Published: (2022) -
Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel
by: Danish, M., et al.
Published: (2022)