Effect of low pressure end conditions on steam power plant performance

• Main Authors: Ali, S.H., Baheta, A.T., Hassan, S.
• Format: Conference or Workshop Item
• Published: EDP Sciences 2014
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904959186&doi=10.1051%2fmatecconf%2f20141302010&partnerID=40&md5=36e1605f4a901447c060b9e0c1f74aba; http://eprints.utp.edu.my/32302/

Most of the electricity produced throughout the world today is from steam power plants and improving the performance of power plants is crucial to minimize the greenhouse gas emissions and fuel consumption. Energy efficiency of a thermal power plant strongly depends on its boiler-condenser operating conditions. The low pressure end conditions of a condenser have influence on the power output, steam consumption and efficiency of a plant. Hence, the objective this paper is to study the effect of the low pressure end conditions on a steam power plant performance. For the study each component was modelled thermodynamically. Simulation was done and the results showed that performance of the condenser is highly a function of its pressure which in turn depends on the flow rate and temperature of the cooling water. Furthermore, when the condenser pressure increases both net power output and plant efficiency decrease whereas the steam consumption increases. The results can be used to run a steam power cycle at optimum conditions. © 2014 Owned by the authors, published by EDP Sciences.