Modeling of axial spring stiffness in active vibration controlled drilling

• Main Authors: Pao, W., Hashim, F.M., Parman, S.
• Format: Conference or Workshop Item
• Published: EDP Sciences 2014
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904962976&doi=10.1051%2fmatecconf%2f20141301004&partnerID=40&md5=b6314fd8f18dbd5c7be60fad78addbdd; http://eprints.utp.edu.my/32292/

During drilling process, substantial amount of vibration and shock are induced to the drill string. Active vibration controlled drilling is introduced to reduce the vibration and increase the efficiency of drilling process. In this system, two main components that determine the damping coefficient are magnetorheological (MR) damper and spring assembly. Performance of vibration damping system is depending on the viscosity of MR fluid in the damper and spring constant of spring assembly. One of the key issues that are unclear from the design is the correlation between the axial spring stiffness configuration and the damping force which needs to be tuned actively. There has been lack of studies on how the viscosity of MR fluid on the active vibration damper affects the damping stiffness of the whole system. The objective of the project is to extract the correlations for the viscous damping coefficient, equivalent spring stiffness and power input to the system. Simplified vibration model is thus created using Simulink, together with experimental data fed from APS Technology's in-house team. Inputs of the simulation such as force exerted, mass of mandrel, spring constant and step time are based on the experimental data and can be adjusted to suit different experiments. By having the model, behavior of the system can be studied and analyzed. From the simulation, it is also observed that the relationship between damping coefficient and power input of the system is linear. © 2014 Owned by the authors, published by EDP Sciences.