Minimizing drilling thrust force for HFRP composite by optimizing process parameters using combination of ANOVA Approach and S/N ratios analysis
Drilling hybrid fiber reinforced polymer (HFRP) composite is a novel approach in fiber reinforced polymer (FRP) composite machining studies as this material combining two different fibers in a single matrix that resulted in considerable improvement in mechanical properties and cost saving as compare...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
EDP Sciences
2014
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904965499&doi=10.1051%2fmatecconf%2f20141304002&partnerID=40&md5=0bd3da3b2f1e6283bc717393728d461b http://eprints.utp.edu.my/32288/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Drilling hybrid fiber reinforced polymer (HFRP) composite is a novel approach in fiber reinforced polymer (FRP) composite machining studies as this material combining two different fibers in a single matrix that resulted in considerable improvement in mechanical properties and cost saving as compared to conventional fiber composite material. This study presents the development and optimized way of drilling HFRP composite at various drilling parameters such as drill point angle, feed rate and cutting speed by using the full factorial design experiment with the combination of analysis of variance (ANOVA) approach and signal to noise (S/N) ratio analysis. The results identified optimum drilling parameters for drilling the HFRP composite using small drill point angle at low feed rate and medium cutting speed that resulted in lower thrust force. © 2014 Owned by the authors, published by EDP Sciences. |
|---|