Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation

Polycyclic aromatic hydrocarbons (PAHs) are mutagenic and carcinogenic contaminants made up of fused benzene rings. Their presence has been reported in several wastewater streams, including produced water (PW), which is the wastewater obtained during oil and gas extraction from onshore or offshore i...

Full description

Saved in:
Bibliographic Details
Main Authors: Haneef, T., Ul Mustafa, M.R., Yusof, K.W., Isa, M.H., Bashir, M.J.K., Ahmad, M., Zafar, M.
Format: Article
Published: MDPI AG 2020
Online Access:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096363988&doi=10.3390%2fw12113132&partnerID=40&md5=a6075bcff8e0f088c20b515b6ded047f
http://eprints.utp.edu.my/29825/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.utp.eprints.29825
record_format eprints
spelling my.utp.eprints.298252022-03-29T02:48:37Z Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation Haneef, T. Ul Mustafa, M.R. Yusof, K.W. Isa, M.H. Bashir, M.J.K. Ahmad, M. Zafar, M. Polycyclic aromatic hydrocarbons (PAHs) are mutagenic and carcinogenic contaminants made up of fused benzene rings. Their presence has been reported in several wastewater streams, including produced water (PW), which is the wastewater obtained during oil and gas extraction from onshore or offshore installations. In this study, ferrate (VI) oxidation was used for the first time for the treatment of 15 PAHs, with the total concentration of 1249.11 µg/L in the produced water sample. The operating parameters viz., ferrate (VI) dosage, pH, and contact time were optimized for maximum removal of PAHs and chemical oxygen demand (COD). Central composite design (CCD) based on response surface methodology (RSM) was used for optimization and modeling to evaluate the optimal values of operating parameters. PAH and COD removal percentages were selected as the dependent variables. The study showed that 89.73 of PAHs and 73.41 of COD were removed from PW at the optimal conditions of independent variables, i.e., ferrate (VI) concentration (19.35 mg/L), pH (7.1), and contact time (68.34 min). The high values of the coefficient of determination (R2) for PAH (96.50) and COD (98.05) removals show the accuracy and the suitability of the models. The results showed that ferrate (VI) oxidation was an efficient treatment method for the successful removal of PAHs and COD from PW. The study also revealed that RSM is an effective tool for the optimization of operating variables, which could significantly help to reduce the time and cost of experimentation. © 2020 by the authors. Licensee MDPI, Basel, Switzerland. MDPI AG 2020 Article NonPeerReviewed https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096363988&doi=10.3390%2fw12113132&partnerID=40&md5=a6075bcff8e0f088c20b515b6ded047f Haneef, T. and Ul Mustafa, M.R. and Yusof, K.W. and Isa, M.H. and Bashir, M.J.K. and Ahmad, M. and Zafar, M. (2020) Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation. Water (Switzerland), 12 (11). pp. 1-17. http://eprints.utp.edu.my/29825/
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Institutional Repository
url_provider http://eprints.utp.edu.my/
description Polycyclic aromatic hydrocarbons (PAHs) are mutagenic and carcinogenic contaminants made up of fused benzene rings. Their presence has been reported in several wastewater streams, including produced water (PW), which is the wastewater obtained during oil and gas extraction from onshore or offshore installations. In this study, ferrate (VI) oxidation was used for the first time for the treatment of 15 PAHs, with the total concentration of 1249.11 µg/L in the produced water sample. The operating parameters viz., ferrate (VI) dosage, pH, and contact time were optimized for maximum removal of PAHs and chemical oxygen demand (COD). Central composite design (CCD) based on response surface methodology (RSM) was used for optimization and modeling to evaluate the optimal values of operating parameters. PAH and COD removal percentages were selected as the dependent variables. The study showed that 89.73 of PAHs and 73.41 of COD were removed from PW at the optimal conditions of independent variables, i.e., ferrate (VI) concentration (19.35 mg/L), pH (7.1), and contact time (68.34 min). The high values of the coefficient of determination (R2) for PAH (96.50) and COD (98.05) removals show the accuracy and the suitability of the models. The results showed that ferrate (VI) oxidation was an efficient treatment method for the successful removal of PAHs and COD from PW. The study also revealed that RSM is an effective tool for the optimization of operating variables, which could significantly help to reduce the time and cost of experimentation. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
format Article
author Haneef, T.
Ul Mustafa, M.R.
Yusof, K.W.
Isa, M.H.
Bashir, M.J.K.
Ahmad, M.
Zafar, M.
spellingShingle Haneef, T.
Ul Mustafa, M.R.
Yusof, K.W.
Isa, M.H.
Bashir, M.J.K.
Ahmad, M.
Zafar, M.
Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
author_facet Haneef, T.
Ul Mustafa, M.R.
Yusof, K.W.
Isa, M.H.
Bashir, M.J.K.
Ahmad, M.
Zafar, M.
author_sort Haneef, T.
title Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
title_short Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
title_full Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
title_fullStr Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
title_full_unstemmed Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation
title_sort removal of polycyclic aromatic hydrocarbons (pahs) from produced water by ferrate (vi) oxidation
publisher MDPI AG
publishDate 2020
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096363988&doi=10.3390%2fw12113132&partnerID=40&md5=a6075bcff8e0f088c20b515b6ded047f
http://eprints.utp.edu.my/29825/
_version_ 1738657020779692032
score 13.159267