Computationally efficient predictive torque control for induction motor drives based on flux positional errors and extended Kalman filter

• Main Authors: Abbasi, Muhammad Abbas, Husain, Abdul Rashid, Nik Idris, Nik Rumzi, ur Rehman, Syed Muhammad Fasih
• Format: Article
• Published: John Wiley and Sons Inc 2021
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/95331/; http://dx.doi.org/10.1049/elp2.12035

This paper proposes an improved model based predictive torque control (MPTC) method based on positional error between reference and estimated stator flux vectors. The main advantages of the proposed method are: the improved computational efficiency which requires minimum hardware resources and weighting-factor-free cost function. Weighting factor is removed by using modified reference transformation, which converts torque reference into equivalent stator flux reference. Improvement in computational performance is achieved by using decreased number of voltage vectors for prediction. An admissibility criterion based on flux positional errors is introduced to reduce the number of voltage vectors. The computational time saved is utilised to incorporate extended Kalman filter for better estimation of flux and torque. The validity of the proposed method is tested on a two-level three-phase inverter fed induction motor drive with dSpace DS1104 as controller board. The dynamic response and computational cost of the proposed method is compared to other established MPTC methods. The superiority of the proposed technique is confirmed by experimental results, which show an average of 32% reduction in computational time when compared to conventional MPTC while comparable dynamic response in terms of torque ripple, flux ripple and load current harmonics, is also maintained.