Integrating pd-doped perovskite catalysts with ceramic hollowfibresubstrate for efficient co oxidation

• Main Authors: Mahyon, N. I., Li, T., Tantra, B. D., Botas, R. M., Wu, Z., Li, K.
• Format: Article
• Published: Elsevier Ltd. 2020
• Subjects: TP Chemical technology
• Online Access: http://eprints.utm.my/id/eprint/93645/; http://dx.doi.org/10.1016/j.jece.2020.103897

Doping Pd into perovskite catalysts helps to reduce light-off temperatures, improve thermal-chemical stability and lowered catalyst cost by decreasing Platinum Group Metals (PGMs). In this study, LaFe0.7Mn0.225Pd0.075O3 (LFMPO) and LaFe0.7Co0.225Pd0.075O3 (LFCPO) were synthesised, characterized and evaluated for catalytic treatment of automotive emissions, using CO oxidation as the model reaction. Such catalysts were further incorporated inside micro-structured ceramic hollow fibre substrates, and compared with a packed bed configuration by light-off temperatures. Performance evaluations suggest that, LFMPO deposited inside the hollow fibre substrate could be light up at 232 °C, which is 10 °C lower than a packed-bed counterpart with the same amount of catalyst (5 mg) and GHSV of ∼5300 h⁻¹. While excessive incorporation of the catalyst (10 mg) generates significantly higher transfer resistance, which impairs catalytic performance of hollow fibre reactors, with CO conversion per gram of catalyst reduced from 0.01 mol g⁻¹ to 0.0051 mol g⁻¹.