Influence of cooling rate on morphology evolution of primary Mg2Si in Al–15Mg2Si-1.0Gd in-situ composite
The effects of cooling rate on morphology of primary Mg2Si in Al–15Mg2Si composite modified with 1.0 wt. % Gd during solidification process were studied. To obtain different cooling rates, the step casting with four different thicknesses was used. The results showed that with increasing the cooling...
Saved in:
Main Authors: | Ghandvar, Hamidreza, Abu Bakar, Tuty Asma, Idris, Mohd. Hasbullah |
---|---|
Format: | Article |
Published: |
Microscopy Society of Malaysia
2020
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/91695/ https://malaysianjournalofmicroscopy.org/ojs/index.php/mjm/article/view/481 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of hot extrusion on microstructural evolution and tensile properties of Al-15%Mg2Si-xGd in-situ composites
by: Ghandvar, Hamidreza, et al.
Published: (2018) -
Influence of solution heat treatment on microstructure and tensile properties of Gd-Treated Al-15% Mg-2 Si in-situ composites
by: Ghandvar, Hamidreza, et al.
Published: (2022) -
Influence of solution heat treatment on microstructure and tensile properties of gd-treated al-15% mg2si in-situ composites
by: Ghandvar, Hamidreza, et al.
Published: (2022) -
Microstructural characterization, solidification characteristics and tensile properties of Al–15%Mg2Si–x(Gd–Sb) in-situ composite
by: Ghandvar, Hamidreza, et al.
Published: (2020) -
Microstructure development and wear behavior of Al-15% Mg2Si-xGd composites before and after hot extrusion
by: Ghandvar, Hamidreza, et al.
Published: (2022)