Payload swing control of a tower crane using a neural network–based input shaper

• Main Authors: Fasih, S. M., Mohamed, Zaharuddin, Husain, Abdul Rashid, Ramli, Liyana, Abdullahi, Auwalu, Anjum, Waqas
• Format: Article
• Published: SAGE Publications Ltd 2020
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/89989/; http://dx.doi.org/10.1177/0020294020920895

This paper proposes an input shaping technique for efficient payload swing control of a tower crane with cable length variations. Artificial neural network is utilized to design a zero vibration derivative shaper that can be updated according to different cable lengths as the natural frequency and damping ratio of the system changes. Unlike the conventional input shapers that are designed based on a fixed frequency, the proposed technique can predict and update the optimal shaper parameters according to the new cable length and natural frequency. Performance of the proposed technique is evaluated by conducting experiments on a laboratory tower crane with cable length variations and under simultaneous tangential and radial crane motions. The shaper is shown to be robust and provides low payload oscillation with up to 40% variations in the natural frequency. With a 40% decrease in the natural frequency, the superiority of the artificial neural network–zero vibration derivative shaper is confirmed by achieving at least a 50% reduction in the overall and residual payload oscillations when compared to the robust zero vibration derivative and extra insensitive shapers designed based on the average operating frequency. It is envisaged that the proposed shaper can be further utilized for control of tower cranes with more parameter uncertainties.