Development of phosphor containing functional coatings via cold atmospheric pressure plasma jet - Study of various operating parameters

• Main Authors: Pandiyaraj, K. Navaneetha, Ramkumar, M. C., Kumar, A. Arun, Vasu, D., Padmanabhan, P. V. A., Tabaei, Parinaz Saadat Esbah, Cools, Pieter, De Geyter, N., Morent, R., Jaganathan, S. K.
• Format: Article
• Published: Elsevier B.V. 2019
• Subjects: Q Science (General)
• Online Access: http://eprints.utm.my/id/eprint/88660/; http://dx.doi.org/10.1016/j.apsusc.2019.05.089

In this study, we deposited phosphorous containing functional coatings on the surface of polypropylene (PP) substrate by cold atmospheric plasma assisted polymerization using low temperature plasma jet. Triisopropyl phosphate (TIP) was used as precursor while the coating process was carried out as a function of deposition potential and monomer flow rate. The influence of various plasma polymerization operating parameters on the surface properties of functional coatings are examined by means of atomic force microscopy (AFM), Scanning electron microscopy (SEM) and X-ray photo electron spectroscopy (XPS). The reactive species involved during the in-situ polymerization were studied by optical emission spectroscopy (OES). The variation in hydrophilic properties of the surface coated film was investigated by measuring contact angle. Furthermore, the stability of post-plasma polymerized films was evaluated by measuring contact angle values 15 days after storing in various ambient conditions (air and distilled water). The characterization results clearly exhibited that phosphorus containing functional films could be successfully deposited on the surface of PP films and the retention of the functional groups could be tuned within the framework of the operating parameters.