Continuous dynamic sliding mode control strategy of PWM based voltage source inverter under load variations

• Main Authors: Anjum, Waqas, Husain, Abdul Rashid, Abdul Aziz, Junaidi, Abbasi, M. Abbas, Alqaraghuli, Hasan
• Format: Article
• Language: English
• Published: Public Library of Science 2020
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/87150/1/JunaidiAbdulAziz2020_ContinuousDynamicSlidingModeControlStrategyofPWM.pdf; http://eprints.utm.my/id/eprint/87150/; http://dx.doi.org/10.1371/journal.pone.0228636

For closed-loop controlled DC-AC inverter system, the performance is highly influenced by load variations and online current measurement. Any variation in the load will introduce unwanted periodic error at the inverter output voltage. In addition, when the current sensor is in faulty condition, the current measurement will be imprecise and the designed feedback control law will be ineffective. In this paper, a sensorless continuous sliding mode control (SMC) scheme has been proposed to address these issues. The chattering effect due to the discontinuous switching nature of SMC has been attenuated by designing a novel boundary-based saturation function where the selection of the thickness of boundary is dependent to the PWM signal generation of the inverter. In order to remove the dependency on the current sensor, a particle swarm optimization(PSO) based modified observer is proposed to estimate the inductor current in which the observer gains are optimized using PSO by reducing the estimation errors cost function. The proposed dynamic smooth SMC algorithm has been simulated in MATLAB Simulink environment for 0.2-kVA DC-AC inverter and the results exhibit rapid dynamic response with a steady-state error of 0.4V peak-to-peak voltage under linear and nonlinear load perturbations. The total harmonic distortion (THD) is also reduced to 0.20% and 1.14% for linear and non-linear loads, respectively.