Predictive modeling and simulation of the structural contact problems between the brake pads and rotor in frictional sliding contact
The complexity of the physical or technological systems to be developed or studied led to employing numerical methods based on the principle of an approach as possible nominal solution, but these require large computations requiring efficient computers. The computer code ANSYS also allows the determ...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Published: |
Springer Verlag France
2018
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/86374/ http://dx.doi.org/10.1007/s12008-017-0376-1 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The complexity of the physical or technological systems to be developed or studied led to employing numerical methods based on the principle of an approach as possible nominal solution, but these require large computations requiring efficient computers. The computer code ANSYS also allows the determination and the visualization of the structural deformations due to the contact of slipping between the disc and the pads. The results of the calculations of contact described in this work relate to displacements, Von Mises stress on the disc, contact pressures of the inner and outer pad at various moments of simulation. One precedes then the influence of some parameters on the computation results such as rotation of the disc, the smoothness of the mesh, the material of the brake pads and the friction coefficient enter the disc and the pads, the number of revolutions and the material of the disc, the pads groove. |
|---|