Three-phase reference current generator employing with Kalman filter for shunt active power filter

• Main Authors: Abu Hasim, Ahmad Shukri, Ibrahim, Zulkifilie, Talib, Md. Hairul Nizam, Syed Mohd. Dardin, Syed Mohd. Fairuz
• Format: Article
• Published: Korean Institute of Electrical Engineers 2017
• Subjects: TA Engineering (General). Civil engineering (General); TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/77580/; http://dx.doi.org/10.5370/JEET.2017.12.1.151

This paper presents a new technique of reference current generator based on Kalman filter (KF) estimator for three-phase shunt active power filter (APF). The stationary reference frame (d-q algorithm) is used to transform the load currents into DC component. The harmonics of load currents are extracted and the three-phase reference currents are generated using KF estimator. The work is simulated using Matlab/Simulink platform. To validate the simulation results, an experimental test-rig have been perform using real-time control dSPACE DS1104. In addition, hysteresis current control was used to generate the switching signal for the correction of the harmonics in the system. The non-linear load were constructed with three-phase rectifier which connected in series with inductor and parallel with resistor and capacitor. The results shows that the new technique of shunt APF embedded with KF is proven to eliminate the harmonics created by the non-linear load with some improvement on the total harmonics distortion (THD).