Modelling and exergoeconomic-environmental analysis of combined cycle power generation system using flameless burner for steam generation

• Main Authors: Hosseini, S. E., Barzegaravval, H., Ganjehkaviri, A., Wahid, M. A., Mohd. Jaafar, M. N.
• Format: Article
• Published: Elsevier Ltd 2017
• Subjects: TJ Mechanical engineering and machinery
• Online Access: http://eprints.utm.my/id/eprint/76124/; https://www.scopus.com/inward/record.uri?eid=2-s2.0-85008395914&doi=10.1016%2fj.enconman.2017.01.001&partnerID=40&md5=872f5ab63156080fdd63bcf4a937b4af

To have an optimum condition for the performance of a combined cycle power generation, using supplementary firing system after gas turbine was investigated by various researchers. Since the temperature of turbine exhaust is higher than auto-ignition temperature of the fuel in optimum condition, using flameless burner is modelled in this paper. Flameless burner is installed between gas turbine cycle and Rankine cycle of a combined cycle power plant which one end is connected to the outlet of gas turbine (as primary combustion oxidizer) and the other end opened to the heat recovery steam generator. Then, the exergoeconomic-environmental analysis of the proposed model is evaluated. Results demonstrate that efficiency of the combined cycle power plant increases about 6% and CO2emission reduces up to 5.63% in this proposed model. It is found that the variation in the cost is less than 1% due to the fact that a cost constraint is implemented to be equal or lower than the design point cost. Moreover, exergy of flow gases increases in all points except in heat recovery steam generator. Hence, available exergy for work production in both gas cycle and steam cycle will increase in new model.