Properties of hooked steel fibers reinforced alkali activated material concrete
In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH). Hooked end steel fibers were added into th...
Saved in:
Main Authors: | , , , , , , |
---|---|
Format: | Conference or Workshop Item |
Published: |
EDP Sciences
2016
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/73036/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-84992391321&doi=10.1051%2fmatecconf%2f20167801068&partnerID=40&md5=d7e541f298941d7a5c2036ebac5ebc09 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my.utm.73036 |
---|---|
record_format |
eprints |
spelling |
my.utm.730362017-11-28T08:38:31Z http://eprints.utm.my/id/eprint/73036/ Properties of hooked steel fibers reinforced alkali activated material concrete Faris, M. A. Abdullah, M. M. A. B. Ismail, K. N. Muniandy, R. Mahmad Nor, A. Putra Jaya, R. Waried Wazien, A. Z. TA Engineering (General). Civil engineering (General) In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH). Hooked end steel fibers were added into the alkali activated material system with percentage vary from 0 %-5 %. Chemical compositions of fly ash were first analyzed by using X-ray fluorescence (XRF). All hardened alkali activated material samples were tested for density, workability, and compression after 28 days. Results show a slight increase of density with the addition of steel fibers. However, the workability was reduced with the addition of steel fibers content. Meanwhile, the addition of steel fibers shows the improvement of compressive strength which is about 19 % obtained at 3 % of steel fibers addition. © 2016 The Authors, published by EDP Sciences. EDP Sciences 2016 Conference or Workshop Item PeerReviewed Faris, M. A. and Abdullah, M. M. A. B. and Ismail, K. N. and Muniandy, R. and Mahmad Nor, A. and Putra Jaya, R. and Waried Wazien, A. Z. (2016) Properties of hooked steel fibers reinforced alkali activated material concrete. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84992391321&doi=10.1051%2fmatecconf%2f20167801068&partnerID=40&md5=d7e541f298941d7a5c2036ebac5ebc09 |
institution |
Universiti Teknologi Malaysia |
building |
UTM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Teknologi Malaysia |
content_source |
UTM Institutional Repository |
url_provider |
http://eprints.utm.my/ |
topic |
TA Engineering (General). Civil engineering (General) |
spellingShingle |
TA Engineering (General). Civil engineering (General) Faris, M. A. Abdullah, M. M. A. B. Ismail, K. N. Muniandy, R. Mahmad Nor, A. Putra Jaya, R. Waried Wazien, A. Z. Properties of hooked steel fibers reinforced alkali activated material concrete |
description |
In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH). Hooked end steel fibers were added into the alkali activated material system with percentage vary from 0 %-5 %. Chemical compositions of fly ash were first analyzed by using X-ray fluorescence (XRF). All hardened alkali activated material samples were tested for density, workability, and compression after 28 days. Results show a slight increase of density with the addition of steel fibers. However, the workability was reduced with the addition of steel fibers content. Meanwhile, the addition of steel fibers shows the improvement of compressive strength which is about 19 % obtained at 3 % of steel fibers addition. © 2016 The Authors, published by EDP Sciences. |
format |
Conference or Workshop Item |
author |
Faris, M. A. Abdullah, M. M. A. B. Ismail, K. N. Muniandy, R. Mahmad Nor, A. Putra Jaya, R. Waried Wazien, A. Z. |
author_facet |
Faris, M. A. Abdullah, M. M. A. B. Ismail, K. N. Muniandy, R. Mahmad Nor, A. Putra Jaya, R. Waried Wazien, A. Z. |
author_sort |
Faris, M. A. |
title |
Properties of hooked steel fibers reinforced alkali activated material concrete |
title_short |
Properties of hooked steel fibers reinforced alkali activated material concrete |
title_full |
Properties of hooked steel fibers reinforced alkali activated material concrete |
title_fullStr |
Properties of hooked steel fibers reinforced alkali activated material concrete |
title_full_unstemmed |
Properties of hooked steel fibers reinforced alkali activated material concrete |
title_sort |
properties of hooked steel fibers reinforced alkali activated material concrete |
publisher |
EDP Sciences |
publishDate |
2016 |
url |
http://eprints.utm.my/id/eprint/73036/ https://www.scopus.com/inward/record.uri?eid=2-s2.0-84992391321&doi=10.1051%2fmatecconf%2f20167801068&partnerID=40&md5=d7e541f298941d7a5c2036ebac5ebc09 |
_version_ |
1643656557859176448 |
score |
13.188404 |