Electricity consumption pattern disaggregation using non-intrusive appliance load monitoring method

• Main Authors: Asa @ Esa, Nur Farahin, Abdullah, Md. Pauzi, Hassan, Mohammad Yusri, Hussin, Faridah
• Format: Article
• Language: English
• Published: Penerbit UTM Press 2016
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/69349/1/MohammadYusriHassan2016_Electricityconsumptionpatterndisaggregationusing.pdf; http://eprints.utm.my/id/eprint/69349/; http://dx.doi.org/10.11113/jt.v78.8692

In practice, a standard energy meter can only capture the overall electricity consumption and estimating electricity consumption pattern of various appliances from the overall consumption pattern is complicated. Therefore, the Non-Intrusive Appliance Load Monitoring (NIALM) technique can be applied to trace electricity consumption from each appliance in a monitored building. However, the method requires a detailed, second-by-second power consumption data which is commonly not available without the use of high specification energy meter. Hence, this paper analyzes the impact of different time sampling data in estimating the energy consumption pattern of various appliances through NIALM method. This is so that consumers will have an overview of time sampling data which is required in order to apply the NIALM technique. As for the analysis, air-conditioning systems and fluorescent lamps were used in the experimental setup. One minute sample rate was the minimum time interval required by NIALM carried out in this analysis. Through the study presented in this paper, it can be established that higher time sampling led to uncertain appliance detection and low accuracy.