Tensile strength polymer matrix composite with reinforcement gigantochloa apus
Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matri...
Saved in:
Main Authors: | , , |
---|---|
Format: | Conference or Workshop Item |
Published: |
2015
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/62183/ http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my.utm.62183 |
---|---|
record_format |
eprints |
spelling |
my.utm.621832017-05-30T01:20:29Z http://eprints.utm.my/id/eprint/62183/ Tensile strength polymer matrix composite with reinforcement gigantochloa apus Djamil, Sofyan Suhot, Mohamed Azlan Hasan, Mohd. Zaki T Technology (General) Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matrix by using a type of epoxy thermosets, reinforced using natural bamboo.The bamboo species used in these tests were GigantoacloaApus, age 3 – 4 years, collected from Bogor Indonesia. The bamboo were cut into lumber strip fiber parts using a cleaver and hand saw. The strip were cut by knife to thikcnesses of 0,5 mm – 1 mm and witdh 1,5 mm – 2 mm. The next process is to soak bamboo with 5% NaOH for 72 hours and dried at room temperature of27o C -29o C for 48 hours. The types of bamboo weave are plain weave, twill weave,basket, and 4 harness Satin, with laminate size 400 mm x 400 mm.x 1 mm. The manufacture process was by hand lay-up end cut with a laser, according to ASTMD 3039-08 standards. The orientation angles are of 0o, 45o, 90o, where each sample taken three specimens,furthermore, the tension test process.The result orientation angle 0o, the highest tensile strength at 4 harness satin woven type: 52.9833 N/mm2. Orientation angle of 45o to the highest value of tensile strength on the type of woven basket: 17.7230 N/mm2 at an angle of 90o orientation of the highest tensile strength values on the type of woven twill: 39, .5813 N/mm2. The orientation angle 0o, the highest strain at basket woven type: 3.2657%. Orientation angle of 45o to the highest value of strain on the type of woven basket: 11.3099% and at an angle of 90o orientation of the highest strain values on the type of woven basket: 3,.4976 %. 2015 Conference or Workshop Item PeerReviewed Djamil, Sofyan and Suhot, Mohamed Azlan and Hasan, Mohd. Zaki (2015) Tensile strength polymer matrix composite with reinforcement gigantochloa apus. In: 2nd International Conference on Engineering of Tarumanagara, 22-23 Oct, 2015, Indonesia. http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en |
institution |
Universiti Teknologi Malaysia |
building |
UTM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Teknologi Malaysia |
content_source |
UTM Institutional Repository |
url_provider |
http://eprints.utm.my/ |
topic |
T Technology (General) |
spellingShingle |
T Technology (General) Djamil, Sofyan Suhot, Mohamed Azlan Hasan, Mohd. Zaki Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
description |
Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matrix by using a type of epoxy thermosets, reinforced using natural bamboo.The bamboo species used in these tests were GigantoacloaApus, age 3 – 4 years, collected from Bogor Indonesia. The bamboo were cut into lumber strip fiber parts using a cleaver and hand saw. The strip were cut by knife to thikcnesses of 0,5 mm – 1 mm and witdh 1,5 mm – 2 mm. The next process is to soak bamboo with 5% NaOH for 72 hours and dried at room temperature of27o C -29o C for 48 hours. The types of bamboo weave are plain weave, twill weave,basket, and 4 harness Satin, with laminate size 400 mm x 400 mm.x 1 mm. The manufacture process was by hand lay-up end cut with a laser, according to ASTMD 3039-08 standards. The orientation angles are of 0o, 45o, 90o, where each sample taken three specimens,furthermore, the tension test process.The result orientation angle 0o, the highest tensile strength at 4 harness satin woven type: 52.9833 N/mm2. Orientation angle of 45o to the highest value of tensile strength on the type of woven basket: 17.7230 N/mm2 at an angle of 90o orientation of the highest tensile strength values on the type of woven twill: 39, .5813 N/mm2. The orientation angle 0o, the highest strain at basket woven type: 3.2657%. Orientation angle of 45o to the highest value of strain on the type of woven basket: 11.3099% and at an angle of 90o orientation of the highest strain values on the type of woven basket: 3,.4976 %. |
format |
Conference or Workshop Item |
author |
Djamil, Sofyan Suhot, Mohamed Azlan Hasan, Mohd. Zaki |
author_facet |
Djamil, Sofyan Suhot, Mohamed Azlan Hasan, Mohd. Zaki |
author_sort |
Djamil, Sofyan |
title |
Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
title_short |
Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
title_full |
Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
title_fullStr |
Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
title_full_unstemmed |
Tensile strength polymer matrix composite with reinforcement gigantochloa apus |
title_sort |
tensile strength polymer matrix composite with reinforcement gigantochloa apus |
publishDate |
2015 |
url |
http://eprints.utm.my/id/eprint/62183/ http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en |
_version_ |
1643655347451199488 |
score |
13.211869 |