صورة الغلاف

Evaluation of the equivalent lumped element parameters of modified microstrip ring resonator

Microstrip ring resonator (MRR) sensor was modeled by simple equivalent lumped element circuits in free space based on simulation data obtained from Microwave Office (AWR) simulator and comparison was made with the measurements using the E5071C Network Analyzer. The calculated reflection coefficient...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلفون الرئيسيون: Yi, Lung Then, Kok, Yeow You, Dimon, Mohamad Ngasri, Wei, Ying Lai
التنسيق: Conference or Workshop Item
منشور في: 2015
الموضوعات:
TK Electrical engineering. Electronics Nuclear engineering
الوصول للمادة أونلاين:http://eprints.utm.my/id/eprint/60648/
https://www.scientific.net/AMM.735.278
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
الوصف
الملخص:Microstrip ring resonator (MRR) sensor was modeled by simple equivalent lumped element circuits in free space based on simulation data obtained from Microwave Office (AWR) simulator and comparison was made with the measurements using the E5071C Network Analyzer. The calculated reflection coefficient, |G| and complex input impedance Zin using lumped element model were compared with the measurements results. Both results showed well agreement with a little discrepancy, basically due to imperfect soldering. The MRR was designed to have operating frequencies between 0.5 GHz and 4.5 GHz. The maximum surrounding of magnetic field, H? is within 15 A/m in free space.

مواد مشابهة