Inspection by ultrasonic tomography (UT) leading trend in welding joint monitoring

• Main Authors: Abd. Rahman, Noor Amizan, Abdul Rahim, Ruzairi, Nor Ayob, Nor Muzakkir, Pusppanathan, Jaysuman, Mohd. Yunus, Fazlul Rahman, Fazalul Rahiman, Mohd. Hafiz, Ahmad, Nasarudin, Ahmad, Anita, Md. Yunus, Mohd. Amri, Abas, Khairul Hamimah, Leow, Pei Ling, Zakaria, Zulkarnay
• Format: Article
• Language: English
• Published: Penerbit UTM Press 2015
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/55969/1/RuzairiAbdulRahim2015_InspectionbyUltrasonicTomographyLeadingTrend.pdf; http://eprints.utm.my/id/eprint/55969/; http://dx.doi.org/10.11113/jt.v77.6416

Welding work is a connection process between the structure and the materials. This process is used in the construction, maintenance and repair especially mechanical engineering. This study discusses the type of welding used in the industry, mainly involving the pipeline welds. On-demand need to every work process when finishing weld requires quality tests to ensure compliance to the standards required. Monitoring through the display image has long been used in Non-Destructive Testing (NDT). Various methods of monitoring used in NDT focused on Ultrasonic Tomography (UT) as a method used in NDT and as an option for the future. Previous imaging result was in two-dimensional (2D) and then upgraded to a three-dimensional image (3D). Besides, there is potential of 3D imaging beyond the existing limits in terms of size, material thickness, especially for welding steel pipes. Achievement through research of existing pipe size so far outside diameter of 200 mm and a thickness of 5.8 mm should be limited in view of the obstacles to enhanced image resolution is less effective when compared to other tomography methods.