Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach
Al-Mg2Si particulate metal matrix composites (PMMC) has recently received wider attention because of its improved properties, however there is a lack of knowledge about machinability characteristics of these composites especially with bismuth addition. The purpose of this study is to evaluate the ma...
Saved in:
Main Authors: | Razavykia, Abbas, Farahany, Saeed, Mohd. Yusof, Noordin |
---|---|
Format: | Article |
Published: |
Elsevier
2015
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/55123/ http://dx.doi.org/10.1016/j.measurement.2015.08.032 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of machining parameters and bismuth addition on al-20%mg2si machinability during dry turning
by: Razavykia, Abbas
Published: (2014) -
Effect of modifier elements on machinability of AL-20%Mg2Si metal matrix composite during dry turning
by: Mohd. Yusof, Noordin, et al.
Published: (2016) -
Effect of modifier elements on machinability of Al-20Mg2Si metal matrix composite during dry turning
by: Yusof, N. M., et al.
Published: (2016) -
Evaluation of the effect of bismuth on Mg2Si particulate reinforced in Al-20%Mg2Si in-situ composite
by: Nordin, Nur Azmah, et al.
Published: (2014) -
Machining of bone: Analysis of cutting force and surface roughness by turning process
by: Noordin, M. Y., et al.
Published: (2015)