Design of a circular polarization microstrip antenna at 2.4Ghz
Microstrip patch antennas represent one family of compact antennas that offer a conformal nature and the capability of ready integration with communication system’s printed circuitry. In this project, a 2.4 GHz circular polarization microstrip antenna is designed, constructed and measured. The mic...
保存先:
| 第一著者: | |
|---|---|
| フォーマット: | 学位論文 |
| 言語: | English |
| 出版事項: |
2005
|
| 主題: | |
| オンライン･アクセス: | http://eprints.utm.my/id/eprint/5355/1/ZuraidahHarithMFKE2005.pdf http://eprints.utm.my/id/eprint/5355/ |
| タグ: |
タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
|
| 要約: | Microstrip patch antennas represent one family of compact antennas that offer a conformal nature and the capability of ready integration with communication system’s printed circuitry. In this project, a 2.4 GHz circular polarization microstrip antenna is designed, constructed and measured. The microstrip antenna chose is a dual –fed circular polarized microstrip antenna. The antenna consists of rectangular patch and 3 dB hybrid. The dual – fed circular polarized microstrip antenna is etched on a FR4 with dielectric substrate of 4.5 with the height of 1.6 mm. Circular polarization is obtained when two orthogonal modes are equally excited with 90° phase difference between them. Circular polarization is important because regardless of the receiver orientation, it will always able receiving a component of the signal. This is due to the resulting wave having an angular variation. |
|---|