Carrier assisted emulsion liquid membrane process for recovery of basic dye from wastewater using continuous extractor

• Main Authors: Othman, Norasikin, Ooi, Zing-Yi, Harruddin, Norlisa, Raja Sulaiman, Raja Norimie, Jusoh, Norela, Zailani, Siti Nazrah
• Format: Article
• Language: English
• Published: Penerbit UTM 2014
• Subjects: TP Chemical technology
• Online Access: http://eprints.utm.my/id/eprint/52059/1/NorasikinOthman2014_Carrierassistedemulsionliquid.pdf; http://eprints.utm.my/id/eprint/52059/; http://dx.doi.org/10.11113/jt.v67.2739

Nowadays, water pollution has become major issue especially dye contaminated wastewaters from the textile industry. Dye causes serious environmental pollution and health problems. The removal of color from dye-contaminated wastewaters in the related industries becomes a major concern all over the world. In this research, several parameters of dye extraction and recovery in the continuous emulsion liquid membrane (ELM) process were investigated. This process consisted of three phases which are external (feed) phase, membrane phase and internal phase. The membrane phase was prepared by dissolving extractant bis(2-ethylhexyl)phosphoric acid (D2EHPA) and hydrophobic surfactant sorbitan monooleate (Span 80) in kerosene as diluents. The internal phase consisted of an aqueous solution of sulfuric acid (H2SO4). The important parameters governing the extraction process of dye such as stirring speed, initial dye concentration, Span 80 concentration and treat ratio (volume ratio of emulsion to external phase) were studied. The results showed that the optimum condition for 25ppm initial concentration of dye extraction are 250 rpm stirring speed, 5% (w/v) Span 80 and treat ratio 1:5. At this condition, the percentage of dye extraction, stripping and recovery were 98%, 82% and 81% respectively. Hence, continuous ELM technique is proven to be a very promising technique in industrial wastewater treatment and recovery of dye