Effect of calcinations on characterizations of fabricated nano manganese ferrite
A citric acid anionic surfactant has been applied for nano manganese ferrite (MnFeO3) fabrication using sol gel method. The calcinations have been varied for 300, 600 and 800oC. The UVDR (UV-Vis Diffused Reflectance) analysis shows a high absorptive band gap after 400 nm for the 600oC calcinated MnF...
Saved in:
Main Authors: | Sundari, R., Hua, T. I., Rusli Yosfiah, M. |
---|---|
Format: | Conference or Workshop Item |
Published: |
2013
|
Subjects: | |
Online Access: | http://eprints.utm.my/id/eprint/51008/ http://dx.doi.org/10.4028/www.scientific.net/AMR.634-638.2150 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Synthesis and characterization of manganese and nickel ferrite nanoparticles
by: Joyce, Liang
Published: (2009) -
Influence of zinc on the structure and morphology of manganese ferrite nanoparticles
by: Hassan Kareem, Sahira, et al.
Published: (2014) -
Fabrication and characterization of ferrites (Mg and Mn)based on FTIR, XRD, SEM and TEM
by: Tang, Ing Hua, et al.
Published: (2012) -
P-hema membrane fabrication applying nanogold for biochemical sensor
by: Sundari, Rita, et al.
Published: (2012) -
Fesem-edx and CV characteristics of dopant (mn, co, ni) magnesium ferrites
by: Jonit, S. S., et al.
Published: (2013)