封面图片

Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design

In the present research, an experimental investigation in lost foam casting of an aluminum-silicon cast alloy, LM6, was conducted. The main objective of the study was to investigate the effect of different sand size and vibration time on the surface roughness of thin-wall castings. A stepped pattern...

Saved in:

书目详细资料
Main Authors:	Sudin, Izman, Shayganpour, Amirreza, Idris, Mohd. Hasbullah
格式:	Conference or Workshop Item
出版:	2011
在线阅读:	http://eprints.utm.my/id/eprint/45588/ http://dx.doi.org/10.4028/www.scientific.net/AMR.337.422
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments
由: Sudin, Izman, et al.
出版: (2011)

Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments
由: Izman, Sudin, et al.
出版: (2011)

Doe analysis of the influence of sand size and pouring temperature on porosity in LFC of LM6 alloy
由: Sudin, Izman, et al.
出版: (2011)

Lost foam casting of aluminium - silicon (LM6) cast alloy
由: G. Khalifa, Alsalihin
出版: (2009)

Lost foam casting of LM6-Al-Si cast alloy
由: A. Asmael, Mohammed Bsher
出版: (2009)

Effects of Casting Parameters on Shape Replication and Surface Roughness of LM6 Aluminium Alloy Cast Using Lost Foam Process
由: Karimian, Majid, et al.
出版: (2015)

Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting
由: Shayganpour, A., et al.
出版: (2012)

Lost foam casting of LM6-A1-Si cast alloy under pressure
由: Niakan , Ali Asghar
出版: (2010)

Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting
由: Shayganpour, Amir Reza, et al.
出版: (2012)

Effects of process parameters on lost foam casting of Al-Si (LM6) alloy
由: Karimian, Majid
出版: (2011)

Evaluation of significant factors in aluminum lost foam casting using doe approach
由: Shayganpour, Amirreza
出版: (2010)

Effect of pouring temperature and melt treatment on microstructure of lost foam casting of AL-Si LM6 alloy
由: Karimian, M., et al.
出版: (2011)

Effect of pouring temperature and melt treatment on microstructure of lost foam casting of al-si lm6 alloy
由: Karimian, Majid, et al.
出版: (2011)

Doe applied to study the effect of process parameters on silicon spacing in lost foam Al-Si-Cu alloy casting
由: Shayganpour, Amir Reza, et al.
出版: (2012)

Influence of pattern coating thickness on porosityand mechanical properties of lost foam casting of Al-Si (LM6) alloy
由: Sulaiman, Shamsuddin, et al.
出版: (2013)

Effect of pressure on structure and properties of lost foam casting of al-11-si cast alloy
由: Idris, Mohd. Hasbullah
出版: (2011)

Effect of pouring temperature and slurry viscosity on heat transfer roughness in lost foam casting
由: Idris, Mohd. Hasbullah
出版: (2011)

Doe analysis of the influence of sand size and pouring temperature on porosity in LFC
由: Sudin, Izman, et al.
出版: (2012)

Properties of pressurized lost foam casting of al-11si alloy
由: Niakan, Aliasghar, et al.
出版: (2012)

Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting
由: Mohamad Kamal, Mohamad Ridzuan, et al.
出版: (2017)

Effect of Lead Addition in LM6 Alloy Castings
由: S.THIRU,, CHITRAMBALAM
出版: (2010)

Effect of pressure on structure and properties of lost foam casting of al-11si cast alloy
由: Niakan, Aliasghar, et al.
出版: (2012)

Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu Alloy casting
由: Karimian, Majid, et al.
出版: (2012)

Influence of mechanical vibration moulding process on the tensile properties of TiC reinforced LM6 alloy composite castings
由: M. Sayuti, et al.
出版: (2011)

Simulation of LM6 alloy with Ti-B refinement in squeeze casting process
由: Mona Kiaee,
出版: (2015)

Effect of casting parameters on porosity in LFC
由: Izman, Izman, et al.
出版: (2012)

An experimental investigation on LM6 AL-SI alloy sand casting to study the correlation between metallurgical properties and solidification rate
由: Lim, Y. P., et al.
出版: (2005)

Doe applied to study the effect of process parametres on silicon spacing in lost foam al-si-cu alloy casting
由: Idris, Mohd. Hasbullah
出版: (2011)

Metal filling characteristics of aluminium lost foam casting
由: Wong, Yun Hong
出版: (2009)

Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting / Mohamad Ridzuan Mohamad Kamal...[et al.]
由: Mohamad Kamal, Mohamad Ridzuan, et al.
出版: (2017)

Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites
由: Sulaiman, Shamsuddin, et al.
出版: (2008)

Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting
由: Salleh, Mohd Shukor, et al.
出版: (2016)

Mechanical Properties of The As-Cast Quartz Particulate Reinforced Lm6 Alloy Matrix Composites
由: M. Sayuti
出版: (2005)

Effect of applying air pressure on gas porosity in lost foam casting of al-si alloy
由: Niakan, A., et al.
出版: (2013)

Effect of material modifier and vibration on mechanical and microstructure properties of aluminium LM6 composite casting
由: Alhajji, Mohammad Sh I A M I
出版: (2021)

The effect of chromium addition on fluidity, microstructure and mechanical properties of aluminum lm6 cast alloy
由: Ahmad, R
出版: (2018)

Roughness models for sanded wood surfaces
由: Tan, P. L., et al.
出版: (2010)

Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy
由: Hussain, Fadi Faris
出版: (2010)

Process control of lost foam casting using slurry viscosity and dipping time
由: Karimian, M., et al.
出版: (2011)

Properties of zinc alloy in green sand casting
由: Zatil Alyani, Mohd Amin, et al.
出版: (2012)