Mechanical and thermal properties of polyamide 6 nanocomposite toughened with epoxidised rural rubber-25

• Main Authors: Navid, Nematzadeh, Wahit, Mat Uzir, Hassan, Azman, Mahmoudian, Shaya
• Format: Article
• Published: Scientific.Net 2011
• Subjects: QD Chemistry
• Online Access: http://eprints.utm.my/id/eprint/45034/

Polyamide (PA6) is an engineering plastic with wide range of applications and the development in the field of montmorillonite (MMT) filled polymer nanocomposites has resulted in the development of PA6/MMT nanocomposites. However, MMT filled PA6 nanocomposites are notch sensitive and brittle at low temperatures, which posed as a major setback for many of its applications. The main objective of this study is to enhance the toughness of PA6/MMT (100/4) nanocomposites with epoxidised natural rubber-25 (ENR25). The ENR-25 content in the composites ranged from 15 to 30 wt%. The PA6/ENR/MMT nanocomposites were extruded and injection molded into tensile and impact test samples. The addition of ENR25 into PA6/MMT nanocomposites improved the impact strength of the nanocomposites while tensile modulus and tensile strength decreased with increasing ENR25 content. The thermal properties of PA6/ENR/MMT nanocomposites were also investigated via thermal gravimetric analysis (TGA). Both T10% and derivative thermal analysis (DTA) determined the lower thermal stability of PA6/MMT nanocomposites after addition of ENR.