Optimal location of static var compensator device for damping oscillations

• Main Authors: Mustafa, Mohd. Wazir, Magaji, Nuraddeen
• Format: Article
• Published: Science Publications 2009
• Subjects: T Technology (General); TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/18979/; http://dx.doi.org/10.3844/ajeassp.2009.353.359

Problem statement: Static Var Compensators (SVC) devices are used to improve voltage and reactive power conditions in AC systems. An additional task of SVC is to increase transmission capacity as result of power oscillation damping. The effectiveness of this controller depends on its optimal location and proper signal selection in the power system network. A residue factor had been proposed to find the optimal location of the SVC controllers to damp out the inter-area mode of oscillations. Approach: The proposed residue factor was based on the relative participation of the parameters of SVC controller to the critical mode. A simple approach of computing the residue factor had been proposed, which combined the linearized differential algebraic equation model of the power system and the SVC output equations. Input-output controllability analyses were used to assess the most appropriate input signals (stabilizing signal) for SVC device. Results: The placements of SVC controller had been obtained for the base case as well as for the critical contingency cases. Conclusion: The effectiveness of the proposed method was demonstrated on 25 bus of south Malaysian power system.