Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity
Vibration intensity technique is used to measure vibration power transmission in thin single layer technical orthotropic plates for flexural waves. Measurement of flexural wave power is carried out in far-field conditions. All measurements are undertaken in the frequency domain using the cross-spect...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Published: |
Elsevier
2005
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/12389/ http://dx.doi.org/10.1016/j.jsv.2004.08.041 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Vibration intensity technique is used to measure vibration power transmission in thin single layer technical orthotropic plates for flexural waves. Measurement of flexural wave power is carried out in far-field conditions. All measurements are undertaken in the frequency domain using the cross-spectra of acceleration signals, facilitating the use of FFT analyzer. The two-transducer technique applicable to these plates is used for these measurements. Technical orthotropic (rectangular corrugation) plates of steel are used for the measurements. One isotropic plate of steel is also considered for comparison. Method of elastic equivalence technique is used. Both input power and vibration power transmission through the plates are estimated. Far-field power is normalized with the input power for flexural wave. Influence of flexural rigidity on vibration energy transfer is also investigated. |
|---|