A comparative study of the influence of volumetric joint counts (Jv) and resistivity on rock quality designation (RQD) using multiple linear regression

• Main Authors: Khan, Muhammad Junaid, Abdullah, Rini Asnida, Sa’ari, Radzuan, Sultan Shah, Kausar, Ullah, Rafi
• Format: Article
• Published: Springer Nature 2023
• Subjects: TA Engineering (General). Civil engineering (General)
• Online Access: http://eprints.utm.my/106635/; http://dx.doi.org/10.1007/s00024-023-03260-8

Rock quality designation (RQD) index is useful for assessing rock mass quality and slope instabilities. The traditional method of calculating RQD, such as drilling, suffers several limitations. Therefore, RQD has been correlated with several parameters, such as fracture frequency (λ), Volumetric Joint Count (Jv) and seismic velocity index. However, all the correlations in previous studies considered single parameters such as Jv and seismic velocity index. This study deployed an integrated unmanned aerial vehicle, 2D electrical resistivity tomography (2D ERT) and borehole survey to correlate and compare the influence of Jv and resistivity on RQD. A single linear regression analysis (SLR) in this research suggests that RQD and Jv are inversely proportional, while resistivity and RQD are directly proportional. In line with this, the negative coefficient (− 2.85) for Jv while positive (0.003) for resistivity obtained using multiple linear regression (MLR) modelling reflects that Jv and resistivity are negatively correlated while RQD and resistivity are positively correlated. Empirical correlation obtained via MLR revealed that the Jv influences the RQD more than resistivity. Based on the strong correlation between RQD and resistivity, it is concluded that resistivity is highly sensitive to the degree of rock mass fracturing. This allows us to conclude that the 2D ERT survey is a reliable and expeditious technique for subsurface rock mass characterization.