Micro-scale abrasion of WC-based coatings with different abrasive type
Various research programmes have been conducted examining cermet coatings regarding wear, corrosion and the combination of both (erosion-corrosion and abrasion-corrosion). Several methods have been used to deposit cermet coatings, the most common being thermal spraying or hard facing (weld over...
Saved in:
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Trans Tech Publications
2013
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/8100/1/J8568_134bd5dd91086a007806f007922db363.pdf http://eprints.uthm.edu.my/8100/ https://doi.org/10.4028/www.scientific.net/AMM.465-466.65 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Various research programmes have been conducted examining cermet coatings regarding
wear, corrosion and the combination of both (erosion-corrosion and abrasion-corrosion). Several
methods have been used to deposit cermet coatings, the most common being thermal spraying or
hard facing (weld overlaying). In the current work, the micro-scale abrasion of coatings deposited
using both high velocity oxy-fuel (HVOF) thermal spraying and weld overlay techniques are
compared. The weld-overlayed WC-nickel alloy systems have the carbide particles are typically
two orders of magnitude larger than in the sprayed coatings. Micro-scale abrasion tests were
performed using silicon carbide, alumina and silica particle slurries with abrasive particle sizes in
the range of 2-10 µm in all cases. Wear rates were determined and the wear scars were examined
using SEM to elucidate the dominant wear mechanisms. The wear rate is generally observed to
decrease with decreasing abrasive hardness from silicon carbide, followed by alumina and silica. |
---|