Characteristics of plates embedded with shape memory alloy wires
Shape memory alloy (SMA) has the potential to be used in engineering applications. It is widely used as sensors, actuators, dampers and when embedded into composite, it demonstrates some unique mechanical and vibration properties such as the strength and damping of the composite material. In t...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2008
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/7464/1/24p%20TAN%20WEE%20CHOON.pdf http://eprints.uthm.edu.my/7464/2/TAN%20WEE%20CHOON%20COPYRIGHT%20DECLARTION.pdf http://eprints.uthm.edu.my/7464/3/TAN%20WEE%20CHOON%20WATERMARK.pdf http://eprints.uthm.edu.my/7464/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Shape memory alloy (SMA) has the potential to be used in engineering
applications. It is widely used as sensors, actuators, dampers and when embedded into
composite, it demonstrates some unique mechanical and vibration properties such as the
strength and damping of the composite material. In this research, the thermo�mechanical properties of SMA wire, the mechanical properties and vibration
characteristics of composites embedded SMA wire were determined. There are two
groups of SMA arrangement in the composite to be fabricated; they are without SMA
wire and with unidirectional fine SMA wires (Flexinol® wire) oriented at 0°, 15°, 30°
and 45° with the volume fraction of 0.08. The characteristics of SMA wire were
determined using the Universal Testing Machine. The Young's modulus, stress - strain
curve analysis, fundamental frequency at first mode and damping behavior of the SMA
embedded composite were also done. Simulation was carried out using MA TLAB based
on Brinson model and Reddy approach. The results showed that Flexinol® wire has the
phase transformation temperatures at 32.840
C, 44.78°C, 52.540
C and 60.900
C and it
agree well with the manufacturer technical data. The Flexinol® wire has Young's
modulus during martensite and austenite of33.16 GPa and 69.59 GPa and the coefficient
of stress influence during martensite and austenite of 10.76 MPa/°C and 9.08 MP~C.
The Young's modulus of the composite is linearly proportional to temperature
increment. The maximum fundamental frequency shifted occur at 45° for the boundary
condition of C-F -F -F and C-F -C-F while for the boundary condition of C-C-C-C were at
15°, 75°, 105° and 165° if compared with the fundamental frequency at 0°. The overall
highest damping occurred when 0.50 A with DC applied at the boundary condition ofC�F-F-F. |
---|